NatureOne® is a durable translucent exterior wood coating that combines 100% acrylic resin technology and transparent iron oxides. The result is a premium coating with advanced UV protection along with a beautiful luster and clarity of the wood grain. The acrylic formulation is naturally breathable, fungi resistant, color stable and has excellent adhesion. No harsh odors and low VOC make this coating applicator and environmentally friendly. A three coat application of NatureOne® builds a finish protection system for your wood sided or log home which is easily maintained with a single recoat every 2 to 5 years. Made in the USA.
Application Method
1. Do a color confirmation test. Allow 2-4 hours dry time between coats. Apply the number of coats recommended for your application.
2. Check moisture content of the wood. Apply coating when the surface moisture is no more than 18%
3. Need to scuff sand with 60-80 grit sandpaper
4. Stir material thoroughly before and during use.
5. Best results are with a quality nylon polyester brush. Airless sprayer application is acceptable, but must be immediately back brushed. Tip: 5-15 to 5-17 Pressure: 1000 to 1500 PSI
6. Generously coat the surface and all exposed end grains. Apply as liberally as possible without runs – do not “stretch out” the product. Apply in the direction of the grain. On textured/rough sawn surfaces, thoroughly cross brush to soak the finish into the surface and finish brushing in the direction of the grain. If spraying, spray until the coating runs slightly and then immediately back brush.
7. Avoid lap marks by starting at one end of a given surface area and while maintaining a wet edge, follow through to the opposite end of the surface area.
8. Siding may be pre-coated with two coats of NatureOne® 100% acrylic exterior before installation. Back priming is recommended for siding.
Available online or local pickup in our store:
Schroeder Log Home Supply, Inc.
1101 SE 7th Avenue
Grand Rapids MN 55744
www.loghelp.com
No comments:
Post a Comment