Sansin Dec Finish

 

Sansin Dec Finish is a two-coat, specially designed formulation for decks, docks, and balconies. The modified natural oils in Sansin Dec Finish penetrate deep into the wood with the kind of variable moisture content frequently found in decks. Although high in solids, the Sansin Dec Finish formula does not leave a thick film on the surface but remains breathable and easy to maintain. Provides excellent UV and weather protection and will not crack, peel, or blister. It is the natural solution for maintaining the beautiful aesthetics found in wood. Made in Canada.

PREPARATION IS KEY TO A SUCCESSFUL PROJECT

• Inspect wood surfaces for defects and make any necessary repairs.
• Use Sansin cleaner and/or wash the entire surface with a minimum 3000 PSI pressure washer use clean water.
• Sand the surface well using a 60-80 grit paper and a variable speed orbital sander.
• Follow by power washing, vacuuming or using compressed air for proper cleaning. Surface must be clean, free from dust, dirt, grease, wax or any existing coatings.

APPLICATION METHODS

• Always flood the surface to the point of saturation
• Dipping
• Brushing
• Flood coating
• Spraying – hand or automated spraying (low pressure or airless)

WORKING PROCEDURE

• Stir well before and during the application process.
• Test formula on an inconspicuous wood surface to ensure proper color and penetration.
• Apply in proper conditions: Ideal temperature of 21°C (70°F) and relative humidity of approximately 50%
• Do not apply if rain or near freezing temperatures are expected.
• Saturate the wood surface.
• Brush out any puddles and runs and level the finish.
• Do not apply on wood that is warm to touch.
• Do not apply in direct sunlight.
• Continually check the surface; wipe up all puddles and brush out runs. 

MAINTENANCE

Horizontal surfaces require maintenance every 1-4 years. Maintenance is necessary when the surface shows signs of wear, such as fading or erosion. Maintaining your wood on a regular basis will ensure
long-lasting color retention, exceptional dimensional stabilization and effective water repellency. Periodically, clean the wood surface with a power washer or Sansin Multi-Wash to remove dirt and residue. How frequently maintenance coats are required will depend on the quality of prior preparation, quality of application and exposure levels. If fading or erosion is evident, prepare wood by using a power washer to lightly clean the wood surface; or use Sansin Multi-Wash. Then re-apply one maintenance coat of Sansin DEC according to instructions. Exposure, workmanship and color will affect the performance of the coating.

STORAGE

Shelf life when stored in ideal conditions is 18 months. Store at a temperature of between + 10ºC and + 30ºC (50ºF and 86ºF).
Keep containers tightly closed.

 

Questions on maintaining the legacy of your wood structure? Give us a call- 1-800-359-6614

Pickup in store - or ship to your door -in whichever woods your cabin dwells.

 Schroeder Log Home Supply, Inc. 

1101 SE 7th Avenue

Grand Rapids MN 55744

1-800-359-6614