Sansin Dec Finish

 

Sansin Dec Finish is a two-coat, specially designed formulation for decks, docks, and balconies. The modified natural oils in Sansin Dec Finish penetrate deep into the wood with the kind of variable moisture content frequently found in decks. Although high in solids, the Sansin Dec Finish formula does not leave a thick film on the surface but remains breathable and easy to maintain. Provides excellent UV and weather protection and will not crack, peel, or blister. It is the natural solution for maintaining the beautiful aesthetics found in wood. Made in Canada.

PREPARATION IS KEY TO A SUCCESSFUL PROJECT

• Inspect wood surfaces for defects and make any necessary repairs.
• Use Sansin cleaner and/or wash the entire surface with a minimum 3000 PSI pressure washer use clean water.
• Sand the surface well using a 60-80 grit paper and a variable speed orbital sander.
• Follow by power washing, vacuuming or using compressed air for proper cleaning. Surface must be clean, free from dust, dirt, grease, wax or any existing coatings.

APPLICATION METHODS

• Always flood the surface to the point of saturation
• Dipping
• Brushing
• Flood coating
• Spraying – hand or automated spraying (low pressure or airless)

WORKING PROCEDURE

• Stir well before and during the application process.
• Test formula on an inconspicuous wood surface to ensure proper color and penetration.
• Apply in proper conditions: Ideal temperature of 21°C (70°F) and relative humidity of approximately 50%
• Do not apply if rain or near freezing temperatures are expected.
• Saturate the wood surface.
• Brush out any puddles and runs and level the finish.
• Do not apply on wood that is warm to touch.
• Do not apply in direct sunlight.
• Continually check the surface; wipe up all puddles and brush out runs. 

MAINTENANCE

Horizontal surfaces require maintenance every 1-4 years. Maintenance is necessary when the surface shows signs of wear, such as fading or erosion. Maintaining your wood on a regular basis will ensure
long-lasting color retention, exceptional dimensional stabilization and effective water repellency. Periodically, clean the wood surface with a power washer or Sansin Multi-Wash to remove dirt and residue. How frequently maintenance coats are required will depend on the quality of prior preparation, quality of application and exposure levels. If fading or erosion is evident, prepare wood by using a power washer to lightly clean the wood surface; or use Sansin Multi-Wash. Then re-apply one maintenance coat of Sansin DEC according to instructions. Exposure, workmanship and color will affect the performance of the coating.

STORAGE

Shelf life when stored in ideal conditions is 18 months. Store at a temperature of between + 10ºC and + 30ºC (50ºF and 86ºF).
Keep containers tightly closed.

 

Questions on maintaining the legacy of your wood structure? Give us a call- 1-800-359-6614

Pickup in store - or ship to your door -in whichever woods your cabin dwells.

 Schroeder Log Home Supply, Inc. 

1101 SE 7th Avenue

Grand Rapids MN 55744

1-800-359-6614

Transformation Siding & Trim

Transformation Siding & Trim in Honey Timber on log cabin

Transformation Siding & Trim is a unique water and oil emulsion provides a very easy finish to apply, but the cured coating is both stunningly beautiful and durable. Transformation Siding & Trim penetrates properly prepared wood and is extremely resistant to UV degradation, moisture, and oxidation. The high quality transoxide pigments enhance the natural beauty of wood grain while imparting a mellow sheen to the logs. Transformation Siding & Trim is compatible with PeneTreat (see Tim-bor), Log Builder Caulking, and Log Jam Chinking. Matte finish.

 

Transformation Siding & Trim will adhere to almost any surface that is properly prepped. Be aware that any product already on the wood that contains waxes, non-drying oils, silicones, or anything that forms thick layers on the wood, can interfere with the adhesion and penetration of Transformation Log & Timber (or any stain) and must first be removed.

It’s about Transformation: old and weathered wood siding brought to life again, or trim stained with color to create the perfect accent. These are the results stain was made for, yet rarely do we observe this in the real world. We see our neighbor’s stain peeling or are reluctant to repair our own siding due to its “big project” nature and the hefty price tag. Contrary to common wisdom, having a great quality stain is only half the battle. The other half is what is neglected the most: routine maintenance. Over time, routine main- tenance is truly the key to easy and inexpensive staining. When applied correctly and maintained every 3-4 years, you can be assured that Transformation Stain® Siding & Trim won’t peel. This eliminates the time and expense of sanding the surface before applying a maintenance coat. Simply do a light power wash, allow the wood to dry and apply another coat. It’s that easy, and you’ll find that your “big project” wasn’t so big after all. Use a quality stain like Transformation Siding & Trim and you’ll transform the look of your wood. Practice routine maintenance and you’ll discover a better way to stain. For Sashco’s complete guide on “a better way to stain,” keep reading.

You’ll find step-by-step instructions on the following key topics:

Sampling

To get the look you want, sample the stain on your wood.

Prep

Proper prep starts you down the right path.

Application

Proper application of a quality stain ensures long-term performance.

Routine Maintenance

Reduce long-term costs, time and effort.

 

Questions on maintaining the legacy of your wood structure? Give us a call- 1-800-359-6614

Schroeder Log Home Supply, Inc.
1101 SE 7th Avenue
Grand Rapids MN 55744

www.loghelp.com

 

Structures NatureColor Base Coat and Recoater

NatureColor® Base Coat is a durable translucent satin exterior wood finish for log homes and wood structures. Its advanced oil alkyd resin formulation is combined with micronized ultraviolet reflecting iron oxide pigments and ultraviolet absorbers allowing beautiful grain definition, UV protection, and microporosity. Applied by brush or sprayed and back brushed in a three coat system, it penetrates and bonds itself to wood surfaces in a translucent weathering shield that when properly maintained will keep your natural wood home new looking year after year. NatureColor® Base Coat is used on exterior vertical surfaces as the first and second coat of a recommended three coat system. It can also be used alone as a one or two coat application on decks, docks, railings and other weather-exposed horizontal surfaces. Apply two coats on outdoor wood furniture and fences.

NatureColor® Recoater is used on vertical wood surfaces as a system-completing topcoat over NatureColor® Base Coat. For optimum performance all three coats should be applied within one month. If weather, budget, or time becomes an issue, NatureColor® Recoater can be applied within one year of the NatureColor® Base Coat applications. (Note: surface preparation must be followed if four weeks time has lapsed between coats). NatureColor® Recoater is also used as a subsequent single application maintenance coat to sustain your structure's new wood appearance. Made in the USA. 

For optimum long-term visual appeal of your natural wood, correct wood surface preparation is of great importance. Options are; Sanding, TSP-Bleach-Water Power washing or Chemically or Abrasive stripping the wood surface. For method to use see spec sheets for your particular application. Coat vertical surfaces within two weeks of cleaning procedures. Apply second coat within two weeks of the first application. Coat horizontal surfaces within one week of surface preparation.

 

Questions on maintaining the legacy of your wood structure? Give us a call- 1-800-359-6614

Schroeder Log Home Supply, Inc.
1101 SE 7th Avenue
Grand Rapids MN 55744

www.loghelp.com

 

X-100 Deck Stain

X-100 Deck Stain provides protection against the intrusion of moisture and water on new, faded, dense and seasoned pressure treated, cedar, redwood, and other hardwood decking lumber. X-100 Deck Stain enables the natural wood grain to show through allowing for a natural wood finish. In the case of an old deck (greater than three years old), the grain of the wood has had an opportunity to be exposed to the general weathering conditions that naturally open its pores. Accordingly, X-100 Deck Stain has been recommended for use on such surfaces, as the first and only step (resealing with X-100 Deck Stain every two to four years). Made in the USA.

 

 Popular colors of X-100 like Cedartone Gold and Cedartone Brown are kept in stock in Grand Rapids, MN. 

 

Available online or local pickup in our store:

 www.loghelp.com

Schroeder Log Home Supply, Inc.
1101 SE 7th Avenue
Grand Rapids MN 55744

1-800-359-6614

 

Outlast Q8 Log Oil

Outlast™ Q8 Log Oil is an EPA registered exterior wood preservative specifically designed to control decay causing organisms (and mold, termites, powder post beetles) in log homes and on wood siding. Outlast Q8 Log Oil provides unsurpassed water repellency and sheer trans-oxide color with one coat coverage. Outlast Q8 Log Oil is a totally non-film forming exterior treatment that will never crack or peel. The trans-oxide pigment system provides excellent UV control that operates like a sunscreen to slow down graying of the wood and provide fade resistant color. The solution soaks into the wood to provide protection, not just on the surface, but also deep into the wood cell structure. Outlast Q8 Log Oil offers unique flexibility in terms of application temperature ranges, log moisture content, and delivery method. Outlast Q8 Log Oil meets all nationwide VOC requirements.

Made in the USA.

Stops decay fungi and mold - Rot control, Toxic to termites and powder post beetles Superior water repellency - Controls cracking and splitting Easy to apply - One coat coverage - low pressure spray, brush, or roll - low-pressure spray application to refusal No lap marks or brush marks - Simple re-coat: no stripping required No cob blasting, sanding, or sandblasting needed for re-coats. 

Stocked and available online or local pickup in our store:

 www.loghelp.com

Schroeder Log Home Supply, Inc.
1101 SE 7th Avenue
Grand Rapids MN 55744

1-800-359-6614

 

Continuing Wood Treatment Training with Sansin

At the end of February we returned to Sansin University for continued learning on wood science, coating chemistry, and the best solutions for protecting wood and enhancing its beauty in different scenarios. Sansin University (Sansin U) is an in-person learning experience that helps Sansin’s retail, architectural and commercial customers understand best practices on the preparation, application and maintenance of Sansin wood finishes. It all starts with the science behind wood protection. Once you understand the natural properties of wood, one can better understand the keys to protecting wood from weathering and how to balance protection with aesthetics. In addition to log, we are proponents of architectural wood in all its forms and applications, and so find it important to stay knowledgeable on the best ways to enhance and protect wood in different scenarios. We are grateful to Sansin for this training opportunity!

Questions on maintaining the legacy of your wood structure? Give us a call- 1-800-359-6614

Schroeder Log Home Supply, Inc.
1101 SE 7th Avenue
Grand Rapids MN 55744

www.loghelp.com

 

Wood Finish & Treatment Decisions For Lasting Log Home Protection

 By Sjoerd Bos, Managing Director at Sansin  

Whether you currently own a log home or are purchasing or building one, you no doubt appreciate the enduring beauty of wood and the log home aesthetic. To protect your investment and ensure your home stands the test of time, you will want to protect it from dirt, moisture, UV exposure and other handling damage. This means wood treatment and finishing are critical decisions. Rather than choosing a coating that creates a non-breathable, waxy film on top of the wood, there are water-borne finish options that deeply penetrate into the logs, allowing water to evaporate and preventing moisture from getting trapped and rotting the logs from within. 

For more than 30 years, the Sansin Corporation has been exclusively dedicated to the development of enviro-friendly, water-borne wood finish technologies that make wood beautiful, durable and easy-to- maintain. Sansin’s wood coatings utilize a unique water-borne alkyd formula that combines the benefits of both oil- and water-based coatings but in a formula with much lower VOC (volatile organic compounds) levels. Additionally, rather than using toxic dyes in the colorant system, Sansin utilizes nano technology to create pure pigments ground so fine that they deliver remarkably vibrant, uniform and long-lasting color. Because the finishes don’t form a film on top of the wood, the coatings won’t crack, chip or peel. Water-borne finishes also dry faster, allowing additional coats to be applied in one day rather than waiting a day or two between coats. When properly applied, the coatings offer superior UV protection and lasting durability that enables log home owners to extend the time between maintenance coats.

Sansin SDF is the company’s most versatile exterior finish and, in addition to log home restoration projects, works well on decks, docks, siding and fences. SDF’s specially-formulated oils and resins penetrate into the wood, creating a monolithic bond for outstanding weather and UV protection that won’t crack, peel or blister. SDF can be used on horizontal and vertical wood surfaces and is available in a wide range of natural, semi-transparent and even solid colors. Because SDF is designed to be highly water-repellent, it’s a natural choice for log homes in moisture-rich environments. SDF Topcoat offers additional durability and superior water repellency using a semi-film forming finish. SDF Topcoat is great for surfaces where water splash-back causes discoloration due to moisture intrusion or frequent wetting.When it comes to protecting wood during construction, Sansin Foundation, a nearly invisible penetrating base coat, is simply the best way to protect logs from damage during construction. Just give the wood a light cleaning, and then you can also use it as a base coat for Classic or SDF, creating those lighter, more natural tones but with built-in UV protection. Foundation penetrates into the wood, creating dimensional stability while reducing checks and wood movement. It is available in three tones that complement the wood species of fir, cedar and lightwood.

 Look no further than Sansin Timber-Tec for your in-yard protection. Timber-Tec is an industrial grade product that protects from UV degradation, blue stain and repels water (helping wood dry), and it also mitigates wood discoloration during the construction process. Timber-Tec can be applied to green or seasoned logs, improving dimensional stability and allowing wood to adjust gradually to moisture levels in the environment. It comes in in two formula options. M-30 provides the natural light color of fresh pine while C-20 is a clear concentrate that provides a light honey color to the wood after it dries.

The Old Forestry Mixture

The old forestry mixture, as some have called it, is a formula for a penetrating oil stain developed by the Forest Products Laboratory in the 1950's. Other than the old forestry mixture, it's more formerly know as the Forest Products Laboratory Natural Finish. The FPL Natural Finish was introduced as follows:

"Many homeowners want a finish that retains a part of the natural color and the grain of new wood or one that enhances the rustic appearance of lumber or plywood. The commercially available natural finishes that form a clear film, such as varnish, have been so short-lived, however, that they are not recommended for exterior use. One durable natural finish is the penetrating stain, developed at the Forest Products Laboratory in the 1950's. The FPL natural finish was formulated to overcome the more serious shortcomings inherent in such finishes of t the film-forming type that are so susceptible to failure by cracking ind peeling. Because the stain penetrates the wood surface and does not form a coating, there is no failure by blistering and peeling even in excessive moisture conditions. There is no coating to scrape before refinishing. Thus, the penetrating stain is easily maintained at a low cost on a variety of wood surfaces. Test results indicate that the first application of the FPL natural finish to smoothly planed surfaces fully exposed to the weather should last I about 3 years. When refinished after weathering, the finish will last much longer. Two coats of stain applied to rough-sawn or weathered surfaces may last 10 years or more."

The exact recipe and full document are listed here. It contains a blend of linseed oil, paraffin wax, solvent, and some other ingredients, including Penta, which is no longer available to the public and restricted to things like the manufacturing of telephone poles and railroad ties. While some of the ingredients are difficult to obtain and Penta is nye impossible, there is at least one alternative on the market. As a ready-made option, a formula similar to that old mixture is available under the brand Organiclear WR-5.

WR-5 Log Home Stain is a superior exterior wood treatment that restores, preserves and enhances the natural beauty of your new or existing log home, deck, fences, railings, shakes and shingles, and outdoor wood furniture. WR-5 offers a unique blend of deep-penetrating premium oils, resins and waxes to create a long-lasting MOISTURE-GUARD™ barrier against harsh weather. To enhance wood life further, WR-5 provides maximum protection against ultraviolet (UV) radiation damage by combining sun blockers to absorb and control UV degradation, thus minimizing wood deterioration. WR-5 penetrating coating will also help prevent wood from cracking or peeling. WR-5 also works very well in high humidity areas. WR-5 allows wood to "breathe" naturally through a micro porous film and prevents moisture penetration. Water beads up and rolls off the exterior wood surface. WR-5 brings out the natural grain beauty of the wood while preventing the wood from cracking and peeling. WR-5 is the perfect choice for the full realm of wood protection your home needs to stand the test of time. For new, unfinished decks, apply two coats of WR-5 this year and then either a third in the Fall or one more next year. WR-5 Clear can be used as a second (if only putting on two coats), third coat, or as future maintenance coats though it won't last as long as a pigmented coat. Some people like to use the clear in this way to "lock" in a particular light color. Made in the USA.

A Few Notes to Consider on Deck Stains

Walking traffic, direct sun, and standing water make decks higher maintenance than log walls.

Most log home finishes are too soft for use as a deck stain. Use a finish rated for decks.

Clear finishes are more prone to UV damage and have shorter lifespans than pigmented finishes on decks and log walls.

For matching the house stain to the deck consider LifeTime, Sansin, Sikkens (ProLuxe), Transformation, WeatherSeal, WR-5, or X-100 Deck.

Inspect areas where the deck meets the log walls. This area can be a problem area for wood rot. Water runs down the deck to the log wall. Flashing will solve this problem where the deck meets the wall.

Contrasting colors of deck stain to the house can be attractive - e.g. light honey colored house, dark honey colored deck.

Pressure treated or green treated decks can be stained, but wait 3 months to 1 year. This allows the wood to dry and the green color to fade. This will give a more true color to the stain that you purchased.

Cedar decks stand up better to the weather but they still need a water repellent, pigmented finish. All wood rots when conditions are right.

Railings are high maintenance; watch the tops of log railings for sunburned and water catching depressions.

Be careful of cedar railings that were strip peeled. Strip peeling (removing the bark without using a drawknife) can leave a thin layer of cambium that will peel off prematurely, making it appear that the stain is peeling. Also, the closed wood pores can repel the log or deck stain's ability to adhere.

Questions on maintaining the legacy of your wood structure? Give us a call- 1-800-359-6614

Schroeder Log Home Supply, Inc.
1101 SE 7th Avenue
Grand Rapids MN 55744

www.loghelp.com